Click on the Start Button, then Programs, then
Accessories, then Dial-Up Networking. You should see the
following box:
Click on New. You should see the
following box:
- Click on the Basic tab.
- In the Entry name: field replace MyDialUpServer with
Hickory Tech Internet.
- In the Phone number: field enter 387-6530. The local number for your city may be different.
- In Dial using: select the modem you are using.
- Click on the Server tab. You should see the following
box:
- Ensure that TCP/IP is checked.
- Make sure that IPX/SPX and NetBEUI are NOT checked.
- Uncheck Enable PPP LCP extensions.
- Click on the TCP/IP Settings button.
- You should see the following box:
- Make sure that Server assigned IP address is selected.
- Select Server assigned name server addresses.
- Make sure that Use IP header compression and Use default
gateway on remote network are both checked.
- Click OK and then click on the Script tab. You should
see the following box:
- After dialing (login) should be set to None.
- Click on the Before dialing button. You should see the
following box:
- This should also be set to None.
- Click OK and then click on the Security tab. You should see
the following box:
- Ensure that Authentication and encryption policy is set to Accept
any authentication including clear text.
- Click OK. You will return to the first screen with the new
phonebook entry.
- To connect, click on the Dial button. The following screen
should appear:
- Enter your username and password in lower case letters in the
appropriate boxes. Leave Domain blank. Click OK to start
dialing.
|